MAKE RAILROAD TOOLS AND SOLUTIONS
YOUR SOURCE FOR:
RRT-3930 Car Stop in the UP.. and DOWN Position
The RRT-3930 & RRT-3931 are hinged-type car stops designed for
permanent installation on either flush or exposed rails. In the raised position,
they protect workers, warehouse doors, crossover walks, etc., or they can swing
down out of the way. The RRT-3930 & RRT-3931 may be padlocked (padlock not included) in either
the up or down position. Car Stops are sold per unit, but must be used in
pairs. A pair consists of one right-hand stop and one left-hand
RRT-3929 Car Stop
The RRT-3929 is a
worldwide industry stand-by, used when heavy and expensive bumping posts are not
required. Rugged, yet simple to handle and attach, the RRT-3929 utilizes four 1"
(25mm) diameter bolts and two wedge-type clamping plates for mounting. As the
car bumps the RRT-3929, the wedge design tightens its hold on the rail. No drilling
is required when mounting these car stops that are cast in special ductile
alloy. Car Stops are sold per unit, but must be used in pairs.
CAR STOP, CLAMP TYPE Part No. RRT-3929
Call For Details
For 60-141 lb. Rail
Shipping Weight:135 lbs
RRT-3928 Car Stop
cushioned car stops transfer impact force directly to the cushioning tie and
ballast. The RRT-3928 utilizes car's weight for additional braking friction on
rail. Universal fit, all welded steel construction. Four bolts for installation
per pair. No holes to drill. The height above the rail is 17"(432mm). They are of an all welded fabrication, and are painted an M/W safety yellow color. Car Stops are sold per unit, but must be used in
CAR STOP, CUSHION TYPE Part No. RRT-3928
Call For Details
For 60-140 lb. Rail
Shipping Weight:180 lbs
For use when wheel interaction stop is not possible!
Available for most all rail section - small to large including crane rail.
Units dimensions designed for the 'A' dimension to be 8" above the top of the rail.
Bumper surface: 1/2" x 4" x 12"
Through bolt design available on request, call!
Many other sizes available, call for pricing, short lead time usually.
Call for custom size! Made to order!
Bumper Stop For 40 LB. ASCE Part No. RRT-40 LB BUMPER STOP NI
Shipping Weight:40 lbs
Bumper Stop For 80 LB. ASCE Part No. RRT-80 LB BUMPER STOP NI